Topfield TF 5050 CI HDMI User Manual page 18

Digital satellite receiver common interface

Hide thumbs Also See for TF 5050 CI HDMI:

Table of Contents

12 Setup

To use the SCART connector

To use the composite video connector

If you have such a television, use an appropriate conversion ca-

ble to link the TV socket on the digital receiver to the matching

socket on your television.

If you connect with a standard SCART cable, you do not have

to make audio connection because the SCART connector can

output stereo audio. But if you use a conversion cable, such as

SCART-to-Component, you have to make audio connection.

NOTE

You cannot view high deﬁnition video with the SCART connec-

tor.

For best results with a standard television set,

you should use a SCART cable. Plug one end

of the cable into the TV socket on the digital

receiver, and plug the other end into a free

SCART socket on your television.

Some televisions have inputs via S-Video or

Component connectors rather than SCART.

NOTE

You cannot view high deﬁnition video with

the composite video connector.

You need to obtain a composite video cable

(RCA cable) to use the composite video con-

nector. Plug one end of the cable into the

VIDEO (yellow) socket on the digital receiver,

and plug the other end into the matching

socket on your television.

Table of Contents