Menu Transparency; Display Time Of The Information Box - Topfield TF6000T User Manual

Digital terrestrial receiver

Hide thumbs Also See for TF6000T:

Table of Contents

3.6 Menu Transparency

Display Format

Sound Mode

RF Output

RF Channel

3.6 Menu Transparency

If you have a TV set with the 4:3 picture format and transmis-

sion is in 16:9, you can select the display format. Select the

Letter Box or Center extract by using

It allows you to conﬁgure the sound mode. Select the Stereo,

Mono, Left and Right mode by using

mode is conﬁgurable later on by using the sound button

on your remote control.

When the digital receiver is connected to the TV by an RF ca-

ble, you may need to select the correct TV standard system.

Select the PAL G, PAL I, PAL K, NTSC M mode by using

buttons.

Select a RF channel by using

channel is CH36. When you change the RF channel number,

you must also change to the same value on the TV. If you do

not, there will be no picture and sound.

To adjust the transparency level of the menus and the other

on-screen display , select the System Setting > OSD Trans-

parency menu. The available levels are ranging from 0% to

50%.

Refer the information box to Section

buttons.

buttons. The Sound

buttons. The default RF

5.2

on page 24.

Table of Contents