American DJ FREQ 16 Strobe User Instructions page 8

FREQ 16 Strobe
Master-Slave Operation:
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode. After you
have set your desired operational mode, press the MENU button
until "SLND" is displayed, and Press ENTER. Use the UP or DOWN
buttons to find the "MAST" setting and press ENTER.
3. On the slave units
tap the MENU button until "SLND" is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either "SL 1" or "SL 2". Once you have made your choice,
press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See UC3 Control below.
FREQ 16 Strobe
Blackout Blackout the unit
Synchronous Strobe by auto
Function Synchronous Strobe by sound
(press and hold the button)
M o d e t S o r b e L ( E D O
American DJ Supply - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 15
© ®
Master-Slave Set Up
This function will allow you to link up to 16
UC3 Control
Select Show 1 – 12
Manual mode
F ) F S h o w
FREQ 16 Strobe
Channel
1
Note: All shows are sound active when a music source is pres-
ent.
FREQ 16 Strobe
Channel
1
2
FREQ 16 Strobe
Channel
1 - 16
L ( E D O N )
American DJ Supply
©
Value
0 - 7 BLACKOUT
8 - 27
28 - 47
48 - 67
68 - 87
88 - 107
108 - 127
128 - 147
148 - 167
168 - 187
188 - 207
208 - 227
228 - 247
248 - 255 RANDOM SHOW
Value
MASTER DIMMER
0 - 255
STROBING
0 - 8 NO FUNCTION
9 - 255 STROBING SLOW - FAST
Value
0 - 255
- www.americandj.com - FREQ 16 Strobe Instruction Manual Page 16
®
1 Channel Mode
Function
SHOWS
SHOW 1
SHOW 2
SHOW 3
SHOW 4
SHOW 5
SHOW 6
SHOW 7
SHOW 8
SHOW 9
SHOW 10
SHOW 11
SHOW 12
2 Channel Mode
Function
0% - 100%
16 Channel Mode
Function
DIMMER
0% - 100%