Auto Clean Operation; Plasma Purification Operation - LG Wall-Mounted Air Conditioner Owner's Manual

Operating Instructions

Auto Clean Operation

o During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy
dehumidification operation can be removed.

PLASMA Purification Operation

Plasma purification operation can be started by pressing the PLASMA BUTTON on the
remote controller.
Repressing it will deactivate the operation.
NOTE
• This features can be used in any operation mode and fan speed by pressing the plasma button.
• Separate plasma purification operation is possible in stop condition. It is cancelled by pressing plasma
button or on/off button.
14 Air Conditioner
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still running
for about 30 minutes internally without cooling or dehumidification
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this
function is cancelled.
NOTE
o During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean
button is used. During this operation, 'Cooling' lamp lights up.
Plasma filter is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating a plasma of high charge electrons.
This plasma kills and destroys the contaminants completely to provide clean
and hygienic air.
) .
PLASMA