LG Wall-Mounted Air Conditioner Owner's Manual page 10

Operating Instructions
The controls will look like the following.
SLEEP
10 Air Conditioner
Signal transmitter
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
JET COOL BUTTON
Used to start or stop the speed cooling.
The Jet Cool operates fan in super high speed
in cooling mode.
HORIZONTAL VANE CONTROL BUTTON
Used to set the desired vertical airflow direction.
VERTICAL LOUVER CONTROL BUTTON
Used to set the desired horizontal airflow direction.
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
TIMER BUTTON(before adjusting)
Used to set the current time and the time of starting / stopping.
ENERGY SAVING COOLING BUTTON
Used to save Energy.
AUTO CLEAN BUTTON
Used to set auto clean.
LED LUMINOSITY BUTTON
Used to adjust LED luminosity.
TIME ADJUSTING BUTTONS
Used to adjust the time.
TIMER SET/CLEAR BUTTON(after adjusting)
Used to set and to cancel the timer operation.
°C TO °F SWITCHING BUTTON
Used to switch temperature reading from
Centigrade to Fahrenheit.
RESET BUTTON
Used prior to resetting time.