Latch Child Restraint Fixing System - Mini Owner's Manual

Child seat security
All rear safety belts and the safety belt for the
front passenger can be prevented from being
pulled out in order to secure child restraint
systems.
Locking the safety belt
1. Secure the child restraint system with the
belt.
2. Pull the belt strap all the way out.
3. Allow the belt strap to retract and pull it taut
against the child restraint system.
The safety belt is locked.
Unlocking the safety belt
1. Open the belt buckle.
2. Remove the child restraint system.
3. Allow the safety belt strap to retract all the
way.
LATCH child restraint
fixing system
LATCH: Lower Anchors and Tethers for Children.
To install and use the LATCH child restraint
system, follow the operating and safety
instructions provided by the manufacturer of the
system; otherwise, the protective function of the
seat may be compromised.<
Online Edition for Part no. 01 40 2 914 765 - © 07/12 BMW AG
Transporting children safely
Anchor points for LATCH anchors
Before installing the child seat, pull the belt out
of the area for the child restraint fixing system.
The anchor points for the lower LATCH anchors
are located behind the labeled protective caps.
restraint system rests firmly against the seat
backrest; otherwise, the protective function of
the seat may be
Child restraint system with tether strap
anchors could be
By way of example, the illustration shows the
cargo area in the MINI.
There are two additional anchors for child
restraint systems with tether straps, arrows.
MINI Clubman:
When the vehicle is equipped with a flat load
floor, the anchors are covered. Their positions
are labeled.
CONTROLS
Make sure that both lower LATCH anchors
are properly engaged and that the child
compromised.<
Use the tether strap anchors to secure
child restraint systems only; otherwise, the
damaged.<
45