Pyramid D100 User Manual page 20

PSI System Controls and Diagnostics
192.168.100.100:100), and click "Add". The network port is fixed at :100 in A500s. Future
versions may lift this restriction in case there are conflicts on particular networks.
Figure 5. PSI Diagnostic Search Utility
Check the box next to the ports you want included in the search. Click "start" and the program
will search for loops and devices on all checked options.
The LAN Broadcast search uses information from the PC operating system to search for A500s
over the whole of your local network. This will generally take longer than going directly to a
known IP address.
A few seconds after you click the "Start" button, the program should find the D100 (plus any
intelligent loop controllers such as the A500). Expanding the tree in the System window will
reveal the all devices that were discovered. Clicking on any discovered device will open its
specific window.
8) Now you can explore the D100 PTCDiagnostic screens.
9.3 Running the PSI Diagnostic program
Clicking on the D100 entry in the System window search tree brings up the D100 screen with the
data tab showing. This is where energy spectra will display, where you can see readbacks for
temperatures, and set the DAC output that programs a high voltage supply for a multiplier.
D100 User Manual D100_UM_081027 Page 20 of 46