Specification - Pyramid D100 User Manual

PSI System Controls and Diagnostics

7 Specification

Inputs
Input impedance
Input analog channel
risetime
Digitization
Pulse pair resolution
Deadtime
Pulse size analysis
Pulse shape analysis
Power input
Power output
Controls
Indicators
Case
Case protection rating
Weight
Operating environment
Shipping and storage
environment
Dimensions
D100 User Manual
One, DC-coupled
< 0.1 ohm in standard configuration.
< 50 nsec
14 bit, 80 MHz.
<= 500 nsec with pulse height analysis of both pulses
< = 50 nsec with both pulses counted
< = 50% of pulses rejected at 500 kHz average input rate
1024 channel on-board histogramming
Pulses accepted for processing based upon width.
Baseline compensation for pulse decay tail
+24 VDC (+/-2 V), 150 mA typical without drain on 5 V output,
200 mA with maximum drain on 5 V output.
+5 VDC (+/- 0.1V), 200 mA maximum
Address: sixteen position rotary switch (01 to 0A valid)
Four status LEDs: power, activity, network, device
Stainless steel folded case.
The case is designed to rating IP43 (protected against solid
objects greater than 1mm in size, protected against spraying
water).
0.27 kg (0.6 lb).
0 to 35 C (15 to 25 C recommended to reduce drift and offset)
< 70% humidity, non-condensing
vibration < 0.1g all axes (1 to 1000Hz)
-10 to 50C
< 80% humidity, non-condensing
vibration < 2 g all axes, 1 to 1000 Hz
(see figures 1 and 2).
D100_UM_081027 Page 12 of 46