Table of Contents
Advertisement
Performing the initial power-on settings
TV controls:
Temporary On-Off (STAND-BY)
When you press the red
button (Temporary power on-off function)
located on the upper right hand side of
your remote control of your television
when it is switched on; the sound and
PR+
the picture will go off. In the stand-by
PR-
function, the power indicator of your
television will glow more. To switch your
television back on, either press the same button,
any of the digital buttons or the
buttons.
Caution!
If you are not going to use your television for a
long period of time, make sure to switch it off
from the main power button.
Program selection
PR+
You may enter whichever program
number you would like by pressing the
PR-
buttons
(
television and your remote control. To
select the programs that are over 9, you
can use the Numerical buttons. You may
enter the number of the program you
would like to select using the numerical
buttons. For example, to switch to the
program number 12, press relatively the
buttons number 1 and 2 found on your
remote control.
PROGRAM TABLE
P 00
P 01
P02 TRT1
P03 TRT1
P04 TRT1
OK
( )
stand-by
(
)/(
)/(
located on your
)
P 05 TRT1
P 10
P 06 SHOW
P 11
P 07
P 12
P 08
P 13
P 09
P 14
SKIP
NAME
MOVE
DELETE
SELECT
BACK
MENU
ENGLISH -10-
Temporary sound mute (MUTE)
To temporarily mute the sound of your
television, press the
case, the sign
screen. When you press the same button
for the second time, the sound will be
on again. If you press the button
the Mute mode, the sound level is increased and
the Mute position is aborted.
)
Return to Selected Button Program (SWAP)
If you would like to return to the program
you watch by pressing a single button
while in any program, press the button
(
). When you press the button
while in any program or AV, it directly
switches to the program you selected. If you
press the same button again, it switches to the
program you last viewed. If you press the button
( )
while the PIP window is open, the main
screen and the PIP screen swap places.
PR 01
( )
button. In that
( )
will appear on the
( )
while in
PR 11
PR 01
( )
Advertisement
Table of Contents
