Viewing Computer Images - Mitsubishi Electric XD490U User Manual

Viewing computer images

A. Connecting the projector to a computer
Preparation:
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.
COMPUTER IN/
COMPONENT VIDEO IN
1
2
DVI-D (HDCP)
1
2
AUDIO IN
PC audio cable (option)
RGB cable
For analog connection:
1. Connect one end of the supplied RGB cable to the
2. Connect the other end of the RGB cable to the monitor
to monitor port
• Additional devices, such as a conversion connector and an
RGB cable
• When viewing images supplied from an analog-connected
For digital connection:
1. Connect one end of a commercially available DVI cable to
2. Connect the other end of the DVI cable to the DVI terminal
to DVI
• Additional devices, such as a conversion connector and an
DVI cable
• When viewing images supplied from a digital-connected
For audio connection:
Computer
• Plug the power cord of the projector in the wall outlet fi rst,
• This projector uses stereo pin jack for its audio input. Check
• Speaker output is mono.
• When the audio cable is connected to the AUDIO OUT ter-
AUDIO OUT
to PC audio
output
For monitor connection:
Monitor
1. Connect one end of the RGB cable that is connected to the
COMPUTER IN/COMPONENT VIDEO IN-1/2 terminal of the
projector.
port of the computer.
analog RGB output adapter, are required depending on the
type of the computer to be connected.
computer, press the COMPUTER button on the remote
control.
the DVI-D (HDCP) terminal of the projector.
of the computer.
analog RGB output adapter, are required depending on the
type of the computer to be connected.
computer, press the DVI-D(HDCP) button on the remote
control.
and then boot up the computer.
the type of the audio output terminal of the connected
computer and prepare a proper cable for connection. Some
computers don't have the audio output terminal.
minal, the speaker output is muted.
MONITOR OUT terminal of the projector.
EN-13