Configure Wireless Settings - Cisco DPC2420 User Manual

Chapter 3 Configuring the DOCSIS Residential Gateway

Configure Wireless Settings

This section describes how to configure Wireless settings for the residential gateway.
Configuring Your Wireless Access Point Parameters
Use the Setup Wireless - Basic page to configure your wireless access point (WAP)
parameters, including SSID and channel number.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the residential
gateway default wireless basic settings.
Click Basic in the Wireless section of the Setup page to access the Setup Wireless -
Basic page.
Setup Wireless - Basic Page
The following illustration is an example of the Setup Wireless - Basic page showing
the factory default settings.
80 4021194 Rev A