Installing The Player - Audiovox AVDBR1 Owner's Manual

Before installing the player:
• Choose a mounting location where the
Blu-ray player does not get in the driver's
way and cannot injure the passenger in
the event of an emergency stop.
• Connect the wiring temporarily. Make
sure it is connected correctly and the Blu··
ray player and the system work properly.
Installing the Player
1. Install the Blu-ray player in a horizontal
position with the front end up at a
convenient angle, but not more than 30
degrees.
2. Screws are provided to attach the Blu-
ray player to the (two) L-brackets. Fasten
the unit to the L-brackets by aligning
the screw holes on the L-brackets with
the screw holes on the unit. Refer to
following figure.
3. Tighten the screws on each side of the
Blu-Ray player.
4. Use self-tapping screws (not supplied)
to mount the L-brackets in the vehicle.
Be careful of hidden wiring under the
carpet.
- 7-