Table of Contents
Advertisement
10
ISO/ISO AUTO
Appears when the sensitivity is displayed.
11
Sensitivity/Remaining image storage capacity
Underlined when the sensitivity can be adjusted.
Displays the number of recordable images immediately after shooting.
Displays the compensation value while adjusting the EV compensation.
Displays the amount of deviation from the correct exposure when the
exposure mode is set to a or M and [Electronic Level] is set to O (On).
(p.100)
12
AE Lock (p.107)
Appears while the AE Lock function is activated.
13
Changing AF point (p.114)
Appears when the AF point can be changed with the AF point switching dial
set to j (Select).
14
Multi-exposure (p.136)
Appears when Multi-exposure is set.
15
Metering Method (p.103)
Appears when the metering method is M (Center-weighted metering) or
N (Spot metering).
16
Shake Reduction (p.122)
Appears when the Shake Reduction function is activated.
17
Flash Exposure Compensation (p.71)
Appears when the flash exposure compensation is in use.
18
EV Compensation (p.105)/Exposure Bracketing (p.138)
Appears when adjusting the EV compensation or when the drive mode is
set to [Exposure Bracketing].
19
File Format (p.180)
Displays the image save format in RAW/RAW+ format.
Not displayed in JPEG format.
• The information is displayed in the viewfinder when the shutter release button
is pressed halfway and during the meter operating time (default setting: 10
sec.). (p.104)
• The AF point(s) in use for autofocus appear in red (Superimpose AF Area)
when the shutter release button is pressed halfway. (p.113)
• When [Cancel AF] is assigned to [AF Button] in [Button Customization] of the
[A Rec. Mode 5] menu, \ is displayed in the viewfinder while the =
button is pressed. (p.110)
• [9999] is the maximum number of recordable images that can be displayed
in the viewfinder. Even if the number of recordable images is 10,000 or more,
[9999] is displayed.
37
1
Advertisement
Table of Contents
