Overview: Vs-6 Key Features - Niles ZR-6 Design Manual

ZR-6 MULTIZONE SYSTEM DESIGN GUIDE

OVERVIEW: VS-6 KEY FEATURES

INTEGRATE AND DISTRIBUTE HD VIDEO
When a VS-6 is integrated with a ZR-6 audio system, you can
distribute high defi nition video and audio to any or all of the
ZR-6's zones. This combination delivers up to four high defi nition
video sources to up to six zones. Five video sources can be
distributed if no iPod is connected.
BUILT-IN CAT-5 BALUNS
The VS-6 enables you to use cost-effi cient CAT-5 cable to
distribute high defi nition video. The VS-6 has a balanced
component video output for each zone. At the other end of the
CAT-5 cable, a Niles balun (either wall mount or component
style) is used to connect to the TV using a short length of basic
component video cable.
FRONT PANEL
Buffered Cascade
Component Video Outputs
REAR PANEL
IR Control Set Up
Input Connection Dipswitches
CALL 1-800-BUY-HIFI or 305-238-4373 – www.nilesaudio.com
IR Sensor Window
Out To Master
Connection
RS-232 Control Component
Input Connection Video Inputs
LOCAL TV AUTOMATION
In order to turn the local TV on and off in a zone, a Niles R-8L or
any learning IR remote must be used.
CASCADE COMPONENT VIDEO OUTPUTS
The VS-6 is equipped with six buffered component video outputs
that allow it to share video sources with a home theater system or
additional VS-6 High Defi nition Component Video Switchers.
Three VS-6s can be combined with three ZR-6s.
CENTRALLY LOCATES GEAR
By centrally locating gear, your customer can access sources
such as DVRs and Blu-ray players from any location in a house.
A customer can begin watching a movie in their home theater
and fi nish watching it in their bedroom.
Main Power Switch
Communication Ports
Zoned Component
Video Outputs
Zoned Balanced
CAT-5 Component
Video Outputs
Voltage
Switch
IEC Power
Receptacle
20