Installation - Baumatic BCD71 Owner's Manual

Installation

Installation Position
1.Please install the dryer on solid and flat ground.
2.Please do not place the dryer on the slope, soft carpet or wooden floor.
3.Please do not install the dryer outdoors, to prevent the dryer from being frozen to
damage of machine parts
Level Adjusting
If the floor is obviously uneven, it needs to be adjusted. It vibrates the machine,
causing machine to move from its position.
Using hands to adjust the height of four machine legs to adjust the levelness of
this dryer.
Power Supply Connection
1.Make sure that the voltage of the power supply is the same as the electric
specification of the dryer.
2.Please replace it by the professional if the power supply wire is damaged, and
only the power wire from the manufacturer or the customer service center can be
used.
3.Please do not connect it with a power board or double adaptor
4.Please do not connect the power supply with wet hands.
5.Please do not pull out the plug by pulling the power wire with forc
.
3
e