Layer / Split; Split / Layer Level; Split Point - Studiologic NUMApiano Operation Manual

Layer / Split

Display - Value +/-
• Display and adjustment of
Split point / Octave
Split - Point
• Split mode on/off
• Split point defi nition

Split / Layer level

Split point

Octave Lower /
Octave Upper
10 NUMA Piano by Studiologic®
Octave Lower
• Octave of Layer 1/2 or lower
and upper split zone
Function
• in combination with Octave
Lower - Upper and Point
Layer
To play two sounds at the same time over the whole
keyboard, press both corresponding sound selection buttons
at the same time (e.g. Grand Piano & Pad 2).
Split Playing two sounds in diff erent keyboard zones is called
split. Press Split to activate this function. The Split button
will light up. For the upper split zone the last selected sound
is automatically used. If you want to change the sound for
the upper split zone just press the corresponding button
(e.g. Bright Piano).
To change the sound for the lower split zone, press Split and
the corresponding sound select button at the same time (e.g.
Split & Bass 1).
If you want to quit the split mode and use all 88 keys to play
the same sound, press Split again.
Use the Balance knob of the Output section to adjust the
relative level of layer 1 to 2 or the lower to upper split zone.
To adjust the split point, press Function & Point. The display
shows the actual selected split point. Using the keyboard (or
Value +/-), select the highest note for the lower split zone.
Press Function again to keep the adjustment and quit the
split point mode.
You can select the octave transposition for both layer and
split zones independently. Use Function &
to make adjustments for the lower split zone / layer 2 and
Function &
No octave transposition is indicated by 0 in the display.
Available values are -3 to 3 an. That means that adjustments
of ±3 octaves are possible.
Press Function again to keep the adjustment and quit the
octave lower / upper mode.
- Upper
Sound Bank
• Layer sound selection
Octave Upper for the upper split zone / layer 1.
Balance
• Relative level of Layer 1/2
and split zones
Octave Lower