Specifications - Hayward LTBUY11300 Owner's Manual

Low voltage pool transformer for colorlogic and crystalogic pool/spa lights
Table of Contents

Advertisement

Available languages

Available languages

Wiring to low voltage Pool, Spa or Landscape Lights
Wiring to low voltage Pool, Spa or Landscape Lights
Wiring to low voltage Pool, Spa or Landscape Lights
Wiring to low voltage Pool, Spa or Landscape Lights
Wiring to low voltage Pool, Spa or Landscape Lights
For field wiring information, please refer to the instructions attached to the inside
front cover of the LTBUY11300 as well as the diagram below.
Hayward LTBUY11300 300 watt transformer powering
low voltage Pool, Spa or Landscape Lights
Blue Wire
(14V tap)
Yellow Wire
(13V tap)
Black Wire
(12V tap)
White Wire
(Neutral)
120VAC Input
Black
To 12 Volt Pool, Spa or
Landscape Lights
White
Bonding Wire
The Hayward LTBUY11300 300 Watt Pool Transformer is a low voltage transformer
for use with pool and spa lights, submersible fixtures and outdoor landscape lights.
It can be used to power up to three Hayward Universal ColorLogic and CrystaLogic
LED lights and offers a dedicated mounting location for the LKBUN1000 Coupler
(necessary when using a powerline networking connection from a Hayward Pro
Logic controller). The LTBUY11300 has 3 output options, 12 v, 13v and 14v.

Specifications

Specifications
Specifications
Specifications
Specifications
Enclosure Size: 7 1/4" (19.4 cm) high x 5 1/4" (13.3 cm)
Enclosure Size:
Enclosure Size:
Enclosure Size:
Enclosure Size:
wide x 4 1/2" (11.4 cm) deep. Mounting brackets
top and bottom.
Enclosure T
Enclosur
Enclosur
Enclosur
Enclosur
e T
e T
e Type: (A)
e T
ype: (A) 0.048" corrosion resistant steel
ype: (A)
ype: (A)
ype: (A)
with electrostatically applied beige coating.
Knockouts: Total of ten 1/2"-3/4" combination.
Knockouts:
Knockouts:
Knockouts:
Knockouts:
(4) bottom, (2) right side, (2) left side, (2) back.
Electr
Electr
ical: Input
ical: Input
Electrical: Input
Electr
Electr
ical: Input
ical: Input 120v, 3A max., Output
Circuit Protection
Circuit Protection
Circuit Protection
Circuit Protection
Circuit Protection: A grounded shield between the primary and secondary wind-
ings assures safe operation and the built-in circuit protection will disconnect power
to the transformer in case of defect or overload. This transformer is suitable for
direct connection to underwater Pool and Spa lights.
4
Introduction
Introduction
Introduction
Introduction
Introduction
Output
Output
Output
Output 12v, 13v, or 14v 300W max.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents