Page 1
ACRH-1 Integrate Hybrid Audio Amplifier User Manual...
Page 2
In this case volume, on and off, you can also switch the AC power to the internal power amplifiers of the ACRH-1 can be used with associated equipment drawing up to 20 amperes (2500 watts).
Page 3
Connections: Note: All inputs and outputs of the preamplifier are unbalanced RCA When the preamplifier is first plugged in, or when the current connectors. from the wall is absent for a several seconds, it is necessary to The back panel is organized by blocks from left to right: the initialize the system.
Page 5
General comments: Characteristics The unit is always warm so it should be placed in a well Integrated: ventilated area. Frequency response 10-50 KHZ Always mount your unit on a firm platform to avoid external Power at 8 ohms 75w./Channel vibrations from loudspeakers, etc. Total Noise <...