Figure B.3 Panel Type Setting Options; Power Fail Function Setting In Bios; Figure B.4 Main Menu: Power Management Setup - Advantech TREK-775 User Manual

3. The Panel Type Setting in BIOS has 6 options available. Besides
"HW Default" you can choose the setting that corresponds to the
specifications of your panel. Selecting a specific value overrides
the automatic HW Default setting. Options are: 640 x 480, 800 x
600, 1024 x 768, 1280 x 1024, HW Default, 1600 x 1200.
B.2 Power Fail Function Setting in BIOS
To set the "power fail" function in BIOS and to activate the "power on
function via ignition switch," follow these instructions:
1. Choose "Power Management Setup" in the main menu of BIOS.
Figure B.4: Main Menu: Power Management Setup
Figure B.3: Panel Type Setting Options
67 Appendix B