Chapter 8
8.1 Introduction
Before installing the USB driver, please take note of the procedures
detailed below. It is important to know which operating system being
applied to the TREK-775/TREK-776, and then refer to the corresponding
installation procedure. This USB driver only needs to be installed under
Window 98 / 2000 and is not necessary for WinXP.
8.2 Installation of USB Driver
Important:
Note:
1.
Execute D:\ USB\ usb2k51.exe
2.
Decide the path you want to install and press "Next" to proceed.
3.
Follow the on-screen instructions.
4.
Choose "Yes, I want to restart my computer," and press "Finish."
The system reboots automatically.
TREK-775/TREK-776 User Manual
USB 2.0
The following are examples only. Follow the
instructions and pay attention to the onscreen
prompts as they appear.
The CD-ROM drive is designated as "D"
throughout this chapter.
50