9.3 Driver Installation for Windows 2000
1.
Install Service Pack 3 or above before running the setup program.
2.
Open the Device Manager and check if there is a "Universal Serial
Bus (USB) Controller" under "Other devices".
3.
Execute the setup program by double clicking on the "SETUP.exe"
file in D:\TREK-75X\USB2.0.
4.
The screen shows the VIA Software License Agreement. Please
read it first and click "Yes" if you wish to continue with the driver
installation.
5.
Click "Next".
6.
Select "Install USB Driver" and click "Next".
7.
The screen shows the Microsoft Software License Agreement.
Please read it first and click "Yes" if you wish to continue with the
driver installation.
8.
Click "OK".
9.
Click "Print to File".
10.
Click "OK".
11.
Click "Finish" and the Microsoft EHCI drivers for Windows 2000
are now installed successfully.
Note:
For driver uninstallation, you can remove the
"Microsoft USB 2.0 Host Controller Driver" by
selecting the "Uninstall" button. This will com-
pletely remove the driver from the system.
45
Chapter 9