Installation Procedures; Connecting The Power Cord; Connecting The Keyboard Or Mouse; Switching On The Power - Advantech TREK-755 User Manual

2.2 Installation Procedures

2.2.1 Connecting the Power Cord

There are two kinds of power supplies for the TREK-755/TREK-756
series, AC and DC.
For AC model:
The Vehicle Mounted Computer can only be powered by an AC electrical
outlet (100 ~ 250 volts, 50 ~ 60 Hz). Be sure to always handle the power
cords by holding plug ends only. Follow these procedures in order:
1. Connect the female end of the power cord to the AC inlet of the
Vehicle Mounted Computer.
2. Connect the power cord to an electrical outlet.
For DC model:
Connect the 2 pin waterproof power cord to the DC inlet of the Vehicle
Mounted Computer.

2.2.2 Connecting the Keyboard or Mouse

Before you start the computer, please connect the necessary mouse or
keyboard to the PS/2 mouse, keyboard port or serial ports.

2.2.3 Switching On the Power

When you look at the bottom of the computer, you will see the power
switch.
TREK-755/TREK-756 User Manual 12