jcb -CS38 Safety And Operating Manual Original Instructions page 3

equivalent.
 Do not operate a chainsaw with one hand. Serious injury to the operator, helpers,
bystanders may result from one-handed operation. A chainsaw is intended for two-
handed use.
 Do not operate a chainsaw when you are exhausted. Fatigue causes
carelessness. Be more cautious before rest periods and towards the end of your
shift. Never operate a chainsaw when under the influence of medication, drugs or
alcohol.
 Use safety footwear. Do not wear loose clothing. Wear protective gloves and
clothing, and eye, hearing and head protection devices.
 Heavy protective clothing may increase operator fatigue, which could lead to
heat stroke. During hot and humid weather, heavy work should be scheduled for
early morning or late afternoon hours when temperatures are cooler.
 Do not stand on any unstable surface while using the chainsaw, such as ladders,
scaffolds, trees, etc. Always keep a sound and firm footing.
 Use caution when handling fuel. Move the chainsaw at least 10 m from the fuelling
point before starting the engine.
 Do not allow other persons to be near the chainsaw when starting or cutting
with the chainsaw. Keep bystanders and animals out of the work area.
 Do not start cutting until you have a clear work area, secure footing and a
planned retreat path from the falling tree.
 Keep all parts of your body away from the saw chain when the engine is running.
 Always carry the chainsaw with the engine stopped and the brake engaged,
the guide bar and saw chain to the rear and the silencer away from your body. When
transporting the chainsaw, use the appropriate guide bar scabbard.
 Do not operate a chainsaw that is damaged, improperly adjusted or not completely
and securely assembled. Be sure that the saw chain stops moving when the throttle
control trigger is released.
 Shut off the engine before setting the chainsaw down. Do not leave the engine
running unattended. As an additional safety precaution, apply the chain brake prior
to setting down the saw.
 Use extreme caution when cutting small-size brush and saplings because
slender material may catch the saw chain and be whipped toward you or pull you
off balance.
 When cutting a limb that is under tension, be alert for spring back so that you will
not be struck when the tension in the wood fibres is released.
SL7 1TB
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00
www.JCBdiy.com
JCB-CS38_960488008-01_Manual_final_ OEM licence.indd 3 JCB-CS38_960488008-01_Manual_final_ OEM licence.indd 3 12/3/2010 5:58:25 PM 12/3/2010 5:58:25 PM