Table of Contents
Advertisement
Using ViSi Remote
With a console view open you can begin controlling the console from the iPad:
Setting levels from channels to the main LR & MONO buses
Tap the [INPUTS] tab button:
Faders directly control levels of any channels already routed to LR and MONO/C buses and will affect the post
fade send level from the channel to any buses.
[ON] buttons control the channel on/off function.
[SOLO/SELECT] solos the channel. (Vi consoles only)
Scroll to other channels by swiping left or right across the main fader panel.
Controlling bus masters (group, aux or matrix)
Tap the [BUSSES] tab button:
Faders control bus master levels.
[ON] buttons control the bus on/off function.
[SOLO/SELECT] buttons solos the bus. (Vi consoles only)
Scroll to other buses by swiping left or right across the main fader panel.
Controlling VCA bus masters
Tap the [VCA] tab button (not Si Compact):
Faders control main VCA bus master level.
[ON] buttons control the VCA mute function.
[SOLO/SELECT] buttons solo the VCA channel.
Scroll to other VCA masters by swiping left or right across the main fader panel.
Controlling L, R and C bus masters
Tap the [MAINS] tab button:
Faders control main bus master levels as indicated.
[ON] buttons control the bus on/off function.
Controlling engineer monitor
Tap the [MNTRS] tab button:
Faders control levels of monitor outputs as indicated.
[ON] buttons control monitor and phones on/off function (not Si Compact).
NOTE: Tapping a name field will assign that fader to the hot channel.
Controlling bus GEQ
Tap any bus name field to assign it to the hot channel then tap the [GEQ] button:
Faders control gain of the indicated GEQ band.
[ON] buttons (when lit red) will reset the GEQ band to 0dB.
[SOLO/SELECT] buttons have no function.
Scroll to other GEQ bands by swiping left or right across the main fader panel.
Soundcraft ViSi Remote User Guide V1.0
Page 8
Advertisement
Table of Contents
