Hot Channel - SoundCraft ViSi User Manual

Hot Channel

The 'Hot Channel' resides in the far right position, and serves a number of functions:
GEQ; if the hot channel assignment is a
bus master the GEQ button will be
shown; pressing this will open the GEQ
for that bus. The [ON] buttons will light
for any band not set to 0dB gain,
tapping the [ON] button will reset the
band gain to 0dB.
SENDS; tapping this button will open
the 'SENDS' view allowing you to
select a bus you wish to mix to;
selecting a bus will put ViSi Remote in
'CONTRIBution' (sends on faders)'
mode allowing sources to feed the bus.
Whilst in CONTRIBution mode the
[ON] buttons toggle the sends from the
channels to the bus ON/OFF.
Scroll keys;
within the group as an example on Vi1, if a VCA master is assigned to the hot channel the scroll
keys will scroll VCA1-8 rolling-round to VCA1.
Faders; any of the faders in the main fader panel can be assigned to the hot channel by tapping the
name of the fader you wish to assign, this feature allows for example 'holding' a favorite input
channel in position whilst you swipe to other channels. When ViSi Remote is started the hot channel
assignment will be the LR master fader.
NOTE. When in CONTRIBution (sends on faders mode) changing of the hot channel assignment is
disabled.
Name; the name display of the hot channel has no 'touch' related function.
Soundcraft ViSi Remote User Guide V1.0
GEQ view
SENDS bus select view
the left & right scroll keys will scroll the hot channel through all faders
Page 7