Subscribe to Our Youtube Channel
Related Manuals for SDX Audio MRDP-C01
Summary of Contents for SDX Audio MRDP-C01
- Page 1 Car Stereo Receiver and Audio Player USER MANUAL AND INSTALLATION INSTRUCTIONS Sondpex Corporation of America Princeton, NJ 08540, USA 1-877-997-7888 732-940-4430 support@sondpex.com Model: MRDP-C01 www.sondpex.com...
-
Page 2: Table Of Contents
CAUTION Thanks for your purchase! Our car audio equipment lets you enjoy diversified functions and This unit is designed to operate on 12-volts DC, negative enjoy superior music quality. We hope you enjoy this product. ground electrical system only, do not attempt to install this unit INDEX in a vehicle having a positive ground system. -
Page 3: Installation
Installation Precautions • Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where, it would be subject to dust, dirt or excessive vibration. -
Page 4: Specification
Specification: POWER ON (OFF) / MUTE: When the mp5 is powered off, Main Unit short press to turn it on. Press and hold to turn off the unit. When Power supplier…………………………...…12V (DC) negative ground Dimensions……………………………..……………...189x138x50mm the mp5 is powered on, short press this button to mute. When the Installation dimension…………………………………193x141x53mm unit is muted, press the button again or rotate the volume button Load……………………………………………………………..4-8 Ω... -
Page 5: Playback Operation
PLAYBACK OPERATION VIDEO INPUT FUNCTION 1. See the picture (4.1) to play the audio or video. Connect the ports of video input and audio input and switch to the mode of video input, the screen will play the input video files Short press to select the file upward or downward. -
Page 6: Electrical Connection
MRDP-C01 Wiring Diagram Electrical Connection Many vehicles are pre-fitted with ISO connectors behind the dash, including all the electrical cabling for a car radio. In such cases, the connections fitted to the vehicle can be directly plugged into the car radio connectors. -
Page 7: Remote Operation
Remote operation Changing the batteries Change the batteries if the remote only works when close to the unit or Remote Control Layout: doesn’t work at all. Make sure to distinguish the positive and negative clearly. Press the plug and pull out Put the new battery Put the plug into The battery at the same time in the plug... -
Page 8: Troubleshooting
Change the fuse TROUBLESHOOTING Please make sure the amperage matches will all other fuses before Before going through the check list, check wiring connection, if any of the changing them. If the fuse is burnt check the power supply first and then problems persist after check list had been made, consult your nearest change the fuse.
Need help?
Do you have a question about the MRDP-C01 and is the answer not in the manual?
Questions and answers