Installation - Pico Macom MPC-16PS/CS Owner's Manual

PICO MACOM
MPC-16PS/CS
MPC-16PS/CS
® ® ® ®
AUDIO AUDIO AUDIO
VIDEO VIDEO VIDEO
PWR PWR PWR
A/V A/V A/V
RATIO RATIO RATIO
CH CH CH CH
RF RF RF
MPC-16 W/16 Modulators
MPC-12C with 16 MPCM45 Modulators

Installation

1. Mount MPC-12C chassis onto a MOR-* steel equipment rack. Fasten the MPC-12C chassis with rack screws in the
bottom mounting holes first then insert them into the top mounting holes.
2. Insert MPCMA or MPCM45 or any other compatible mini-modulator into the chassis.
3. Mount the MPC-16PS/CS by placing it on top of the MPC-12C chassis.
Secure the unit to the rack with four rack screws.
4. Connect each of the 3-wire cables to the 3-pin connector at the rear of the modulator. Caution: When connect-
ing the 3-wire cables align the connector with the guide tab on the 3-pin connector. Also, be careful not to bend
the modulator 3-pin connector.
5. Connect the RF output of each modulator to each of the MPC-16PS/CS combiner inputs. For best isolation
connect each modulator in order i.e., modulator 1 to port 1, modulator 2 to port 2, modulator 3 to port 3, etc.
6. Turn on the MPC-16PS/CS and verify that the blowers and side cooling fans are operating and the modulator power
lights or channel displays are lit.
CONTACT US 858.546.5050
®
MPC-16PS/CS
Power Supply and Combiner/Cooling System
® ® ® ®
AUDIO AUDIO AUDIO AUDIO
VIDEO VIDEO VIDEO VIDEO
PWR PWR PWR PWR
A/V A/V A/V A/V
RATIO RATIO RATIO RATIO
CH CH CH CH
RF RF RF RF
Owners Manual
® ® ® ®
AUDIO AUDIO AUDIO AUDIO
VIDEO VIDEO VIDEO VIDEO
PWR PWR PWR PWR
A/V A/V A/V A/V
RATIO RATIO RATIO RATIO
CH CH CH CH
RF RF RF RF
RESET
OFF
® ® ® ®
AUDIO AUDIO AUDIO AUDIO
VIDEO VIDEO VIDEO VIDEO
PWR PWR PWR PWR
A/V A/V A/V A/V
RATIO RATIO RATIO RATIO
CH CH CH CH
RF RF RF RF
www.picomacom.com
®
AUDIO
VIDEO
PWR
A/V
RATIO
RF
7