Charging And Synching; Clock Set And Clock Memory - JBL On Time 200iD User Manual

TROUBLESHOOTING
CHARGING AND SYNCING
Symptom
iPod will not charge
Possible Problem
Wrong adapter is used
The iPod is not making full contact with
the docking station
Solution
Make sure correct adapter is used for your specific
iPod model.
Make sure the iPod is seated securely into the
docking station.
Note
iPod is not recognized by the
computer when docked into
the JBL On Time 20010 unit,
or there is an error in data
transfer
Third-party accessories may be conflict- Make sure you do not have the JBL On Time 20010
ing with the USB signal unit connected to a USB hub; connect the unit
directly into the computer's USB port.
Try connecting the USB cable to another port on the
USB port is not supplying enough power back ofthe computer.
CLOCK SET AND CLOCK MEMORY
Symptom Possible Problem Solution Note
Clock is not set to correct time Incomplete setup
JBL On Time 2001D unit does There are no batteries installed in
not retain memory settings the unit
when there is a power outage,
or if the unit is unplugged Batteries may be low
14 .,IBL ON TIME 200lD USER GUIDE
Be sure to follow the clock setting procedure
through, to the end. A confirmation screen will be
displayed when set completely.
Make sure you install three AAA batteries in the
base of the JBL On Time 20010 unit.
If you have installed three AAA batteries, replace
them, as they may be defective.