Table of Contents
Advertisement
overview
CAUTION
1.
Do not drop objects on the product or apply strong blows to it. Keep
away from a location subject to excessive vibration or magnetic
interference.
2.
Do not install in a location subject to high temperature (over 50°C), low
temperature (below -10°C), or high humidity. Doing so may cause fi re or
electric shock.
3.
If you want to relocate the already installed product, be sure to turn off
the power and then move or reinstall it.
4.
Remove the power plug from the outlet when there is a lighting storm.
Neglecting to do so may cause fi re or damage to the product.
5.
Keep out of direct sunlight and heat radiation sources. It may cause fi re.
6.
Install it in a place with good ventilation.
7.
Avoid aiming the camera directly towards extremely bright objects such
as sun, as this may damage the CCD image sensor.
8.
Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus.
9.
The Mains plug is used as a disconnect device and shall stay readily
operable at any time.
10.
When using the camera outdoors, moisture may occur inside the camera
due to temperature difference between indoors and outdoors. For this
reason, it is recommended to install the camera indoors. For outdoor
use, use the camera with built-in fan and heater.
4_ overview
Hide quick links:
Advertisement
Table of Contents
