Lifting Information; Installation Codes And Procedures - Aircel VF-10 Installation And Operation Manual

Aircel VF Series - Models 10 - 1200

Lifting Information

1. Use all lifting points provided. Special care must
be used when lifting the dryer to prevent tip-
over.
2. Use clevis connectors, not hooks, on lifting
slings.
3. Only lift unit under support frame/base by using
the fork lift openings provided. Do not lift by
piping.
4. Check the approximate weight provided on
the specification control drawing to ensure
adequate lift truck capacity.
5. Allow only qualified operators to lift the
equipment.
6. Refer to applicable OSHA regulations and local
codes when using cranes, forklifts, and other
lifting equipment.
WARNING!
• Failure to lift the unit correctly can
result in severe personal injury or
property damage.
• Use appropriate lifting equipment
and adopt all safety precautions
needed for moving and handling the
equipment.
• A hand cart, forklift or crane is
recommended for unloading and
installation.
• Lift unit by lifting lugs and frame
only. Do not lift by piping.
10

Installation Codes and Procedures

WARNING!
• Follow proper lock out/tag out
procedures before performing
service or maintenance work.
• Electrical installation must be
performed by a qualified electrician
and comply with all applicable
national and local codes.
1. Safe and efficient operation of the unit depends
on proper installation.
2. Authorities with jurisdiction should be
consulted before installing to verify local codes
and installation procedures. In the absence
of such codes, install unit according to the
National Electric Code and NFPA No. 70-latest
edition.
3. A qualified installation and service agent
versed in all regulatory codes must complete
installation of this unit.
CAUTION!
• A copy of the Operation Manual
must be made available to all
personnel involved with the
installation, operation and
maintenance of the equipment,
to avoid injury to personnel or
property damage.
• Appropriate tools must be used for
all installation and maintenance
work, to avoid injury to personnel
or property damage.