The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
Page 4
GENERAL 1. Keep work areas clean. Cluttered work areas and benches can cause accidents. 2. Consider work area environment. Keep the work area well lit. Do not use your tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases.
Page 5
GENERAL (cont.) 14. Unplug the tool. Shut off the power and wait for the tool to come to a complete standstill before leaving it unattended. Unplug the tool when it is not in use, before changing any parts of the tool, accessories or attachments and before servicing.
Page 6
GLUE GUN OPERATION Cordless Glue Gun This is not a rechargeable glue gun but when connected to a 240V power source, the glue gun heats an element inside the unit allowing you to remove the gun from the stand and continue gluing for approximately 5 minutes. Replace the glue gun back on the heating stand and it will reheat the element in about 2-5minutes, depending on how long you have left the glue gun off the heating stand.
Page 7
Never immerse any part of the tool into liquid. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the glue gun by an unauthorised person or by mishandling of the tool.
Page 8
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 1 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the OZGGC15A and is the answer not in the manual?
Questions and answers