Specifications & Warranty Disclaimer - Hifonics Atlas AXi3003 Owner's Manual

MODEL
CHANNELS
CIRCUIT
OUTPUTPOWER RMS 13,8 V
Channell 1/2
Channel 3 (Subwoofer Channel)
OUTPUTPOWER MAX. 13,8 V
Channell 1-4
Channel 5 (Subwoofer Channel)
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
Channel Separation
THD&N
Input Sensitivity
Input Impedance
CH 1 & CH 2
X-Over Modes
Various Highpassfilter
CH 5
Various Lowpassfilter
Various Subsonic Filter
Bass Boost
Bass Remote
Input Mode Switch
Fuse Rating
Dimensions
Width & Height
Length (Length total)
Technical specifications are subject to change! Errors are reserved!
For damages on the vehicle and the device, which caused by handling errors of the device, we cannot assume liability.
All HiFonics Amplifiers are equipped with an individual serial number, which will be registered for statistic and service
conditional purposes.
All HiFonics Amplifiers are equipped with a CE-Certification Mark. Hence, these devices are certified for the use inside vehicles
inside the European Union (EU).
WARRANTY DISCLAIMER
The warranty complies with legal regulations. Failures or damages caused by overload, improper use or by participating in
competitions, are not covered by the warranty.
Please return the defective product with a valid proof of purchase and a detailed malfunction description to your dealer.
SPECIFICATIONS
AXi3003
3
Channel 1/2 CLASS A/B Analog
Channel 3 CLASS D Digital
2 x 75 / 125 Watts @ 4 / 2 Ohm
1 x 250 / 450 / 650 Watts @ 4 / 2 / 1 Ohm
2 x 150 / 250 Watts @ 4 / 2 Ohms
1 x 500 / 900 / 1300 Watts @ 4 / 2 / 1 Ohms
10Hz - 30 kHz
CH1/2: > 340 - CH3: > 45
> 95 dB
> 60 dB
0,05%
6 - 0.2 V
> 47 kOhms
HP - Full
40 - 150 Hz
40 - 150 Hz
15 - 40 Hz
0 - 12 dB @ 45 Hz
•
2CH / 3CH
2 x 40 A
260 x 60 mm
350 (380)
20