Serial Ata - Gigabyte GA-7GEWH-RH User Manual

GA-7GEWH-RH Motherboard
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI
LPC
Parallel ATA
Enabled
Disabled

Serial ATA

Enabled
Disabled
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Serial ATA
SATA Controller Mode Option
Compatible Mode
Enhanced Mode
Note: Pre-Win2000 operating system do not work in Enhanced mode.
Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
Set Route Port 80h I/O cycles to the LPC bus.
Enable Parallel ATA. (Default setting)
Disable the device.
Enables on-board serial ATA function. (Default setting)
Disables on-board serial ATA function.
Auto detected. (Default setting)
Set Native mode to Serial ATA.
SATA and PATA drives are auto-detected and placed in
Legacy mode. (Default setting)
SATA and PATA drives are auto-detected and placed in
Native mode.
4 9