SurgeX iControl SX1115-iP User Manual

Web-enabled power conditioning management system

Advertisement

USER MANUAL
SurgeX
SX1115-iP
SX1120-iP
Web-Enabled Power Conditioning
Management System
V1.0.19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iControl SX1115-iP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SurgeX iControl SX1115-iP

  • Page 1 USER MANUAL SurgeX SX1115-iP SX1120-iP Web-Enabled Power Conditioning Management System V1.0.19...
  • Page 2: Table Of Contents

    iControl Manual INTRODUCTION ............................2 INITIAL SET-UP............................3 INSTALLATION ............................3 ..........................3 VOLT CONNECTIONS ........................4 TELNET CONNECTION ..........................4 TEMPERATURE SENSOR LED INDICATORS ............................ 4 WEB SERVER ............................4 ..............................4 HOME PAGE ............................... 5 ACTIONS PAGE ............................7 SEQUENCES PAGE ............................
  • Page 3: Introduction

    Inrush Current Elimination circuitry (on receptacles 1 and 2). SurgeX ICE eliminates problems associated with inrush currents from large loads such as amplifiers. With SurgeX ICE, it is not necessary to take inrush currents into account when designing the AC power for a system.
  • Page 4: Initial Set-Up

    *Default access level and passwords: Viewer/viewer, User/user, Admin/admin INSTALLATION The SurgeX iControl is designed to be installed in a 19 inch equipment rack and requires one unit (1-U) of rack space. Use the four screws provided with the product to secure the rack ears to the rack rails.
  • Page 5: Tcp/Ip (Telnet) Connection

    iControl Manual TCP/IP (Telnet) Connection The RJ45 connector for Ethernet is situated on the rear panel between the power cord and the first receptacle. Temperature Sensor In order to obtain a temperature reading, the external temperature sensor must be connected to the top terminal block.
  • Page 6: Actions Page

    iControl Manual Surge Protection Status indicates that the surge protection is fully functional. Rack Temperature displays the temperature of the sensor that is connected to the top rear terminal block. The temperature is displayed in degrees C. If the temperature sensor is not connected, the display will read “NC”...
  • Page 7 Self-Test failure. In the unlikely event that the Surge Protection Status maintains a Failed state after pressing “Clear Shutdown”, the iControl will need to be returned to SurgeX for analysis and repair or replacement. * Press “Clear Shutdown” on the Setup/Outlets page to clear over-temperature and over-current shutdown events.
  • Page 8: Sequences Page

    iControl Manual Send an Email will send an email to a chosen recipient. The recipients showing in the drop- down box must be created in Setup Email before an action can use them. *Please do not use special characters (<, >, #, etc.) in the email subject or body, or end the message body with a period (.).
  • Page 9: Setup Page

    iControl Manual The dialog for each schedule type is similar. You must give the new schedule a unique name, which should be something that clearly says what this schedule will do. You then select the date and time at which to execute this scheduled event. The actions themselves are as follows: Change an Outlet is used to turn an outlet on or off.
  • Page 10 iControl Manual Server Information specifies the email server and whether login is required. Login information specifies a login name and password for an email account with access to the server specified in Server Information. (The Password field accepts characters such as letters and numbers.
  • Page 11: Front Panel Reset Button

    iControl Manual state prior to the shutdown event; “Last Known State” will return the outlet to its state prior to the shutdown event. ICE sets the enabling or disabling of the ICE function. This is available only for outlets 1 and 2. Security This page is used to set passwords for each of the three access levels: Viewer, User, and Admin.
  • Page 12: Specifications

    iControl Manual Specifications Load Rating: 15/20 Amps at 120 Volts (SX1115iP/SX1120iP) Power Requirement (no load): 5 Watts Surge Let-through Voltage (6000 Volt surge): 0 Volts UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 Volts, 3000 Amps, B3 pulse; measured suppressed voltage, 170 Volts;...

This manual is also suitable for:

Icontrol sx1120-ip

Table of Contents