ViewSonic PJD6345 User Manual page 41

HDMI Format
Selects appropriate HDMI format automatically or manually.
Note
•
This function is only available when the HDMI-input port is in use.
•
When HDMI Format is "Auto", HDMI Range will be gray out.
HDMI Range
• Enhanced: The range for HDMI output signal is from 0 - 255.
• Normal: The range for HDMI output signal is from 16 - 235.
Blank Screen
To select the screen color when Blank function is active.
Message
Enable or disable the message box at the right bottom of the screen.
Auto Source
Automatically scan through all the input source if the function in the OSD menu is On.
The function will stop the signal auto scan process and fix the signal source you
preferred if you turn Off the Auto Source.
Auto Power Off
Allows the projector to turn off automatically if no input signal is detected after a set
period of time.
Sleep Timer
No matter whether the projector detect signal or not, the projector will turn off
automatically when the countdown has finished.
Standby Setting
Network
Set whether the network function works when the projector is in standby (powered off
but connected to AC power).
Note
•
Less than 0.5W power consumption when network is turned OFF.
•
When Power Saving is On, the Active VGA out and Active Audio out settings are not
available.
Active VGA Out
Set whether the VGA OUT function works when the projector is in standby (powered
off but connected to AC power).
Active Audio out
Set whether the audio out function works when the projector is in standby (powered
off but connected to AC power).
Quick Power Off
• On: The projector will directly shut down without cooling procedure.
• Off: The projector will shut down following normal cooling procedure.
34