Insert Memory Card; Video Storage And Download - CatCam Camera User Manual

4. Insert Memory Card

If the camera is purchased without a memory card or the memory should get changed then
proceed as described:

Ensure that the camera is turned OFF and not connected to the USB interface.

Open the enclosure and pull out the whole camera board.

The circle marks the slot for the memory card (Micro SD). Here, put in the memory card
with label facing up until it locks in. To eject, first press the card into the slot until it
releases then pull it out.

5. Video Storage and Download

The video recordings are stored in AVI format. We recommend using the free VLC player which
has several codec's already integrated. VLC is also working with different operation systems.
To download the recordings open the camera as described before and connect the cable to the
USB interface. The computer should recognize the camera as an additional drive. If this not the
case check if the camera is switched off before connecting it to the computer.
Now you can copy and erase files like on a regular hard disk.
Note: Prior to disconnecting the camera from the computer make sure you stopped it
!
with the device manager. Otherwise the file system of the camera may become
corrupt.
Video CatCam User Manual - Page 6 of 12