Specifi Cations - Mitsubishi Electric LDT42IV User Manual

Specifi cations
Specifi cations (LDT421V)
Product Specifications
LCD Module
Brightness:
Contrast Ratio:
Response time:
View Angle:
Design View Distance:
Frequency
Pixel Clock
Viewable Size
Input Signal
PC-Input:
Input-terminal:
VIDEO Input:
AUDIO Input:
RS-232C:
Output Signal
PC-Output:
Output-terminal:
VIDEO Output:
AUDIO Output:
Speaker Output:
RS-232C:
Resolutions Supported
Power Supply
Power Consumption
Power Save:
Operational Temperature:
Environment
Storage Temperature:
Environment
Dimension Net without stand:
Net with stand:
Weight Net without stand:
Net with stand:
Wall mounting interface
Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories
Note: Technical specifications are subject to change without notice.
Analog Input
Diagonal:
42" / 106.7 cm
Pixel Pitch:
0.681 mm
Resolution:
1366 x 768 dots
Color:
Over 16 million colors (depending on video card used)
500 cd/m2 (typ.)
1500:1 (typ.)
8 ms (typ. G to G)
Up and Down 178°, Left and Right 178° (typ.) @CR>10
1000 mm / 39.4 inches
Horizontal:
15.625 / 15.734, 31.5 - 91.1 kHz
Vertical:
50.0 / 58.0 - 85.0 Hz
13.5 -165.0 MHz
930.25 x 523.01 mm / 36.6 x 20.6 inches
Video:
Analog RGB Video: 0.7 Vp-p
Input impedance 75 ohm
Sync:
Separate HV sync: TTL level (Pos./Neg.), Sync-on-green
Input Impedance 2.2K ohm
BNC (R,G,B,H,V), 15 Pin Mini D-sub
Composite: 1.0 Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y: 1 Vp-p C: 0.286 Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component: 1.0 / 0.7 Vp-p
Input Impedance 75 ohm BNC-INPUT
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
In:
9 Pin Mini D-sub
Video: Analog RGB Video: 0.7 Vp-p with 75 ohm terminated
Sync: Separate HV sync: TTL level (Pos./Neg.)
15 Pin Mini D-sub
BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated
RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated
External Speaker Jack 7 W + 7 W (8 ohm)
Out:
9 Pin Mini D-sub
640 x 480 at 60 Hz to 85 Hz
800 x 600 at 50 Hz, 60Hz to 85 Hz
1024 x 768 at 50 Hz, 60Hz to 85 Hz
1280 x 768 at 50 Hz, 60Hz to 85 Hz
1360 x 768 at 50 Hz, 60Hz* to 85 Hz
1280 x 1024 at 60Hz to 85 Hz
1600 x 1200 at 60 Hz.....................Maximum Resolution
* Recommended Resolution
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i
2.3 - 1.05 A @100 - 240 V AC, 50 / 60 Hz
Max 230 W
Less than 5 W (Power button OFF/Main power switch ON)
Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F
Humidity:
20 - 80 % (Without condensation)
-20 - 60 °C / -4 - 140 °F
Humidity:
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
1022 mm (W) x 612 mm (H) x 126.8 mm (D) / 40.24" (W) x 24.09" (H) x 4.99" (D)
1022 mm (W) x 643.3 mm (H) x 386.1 mm (D) / 40.24" (W) x 25.33" (H) x 15.2" (D)
Gross:
1180 mm (W) x 758 mm (H) x 290 mm (D) / 46.46" (W) x 29.84" (H) x 11.42" (D)
57.2 lbs / 26 kg (Approximately)
60.3 lbs / 27.4 kg (Approximately)
Gross:
73.7 lbs / 33.5 kg
12 Holes (100 mm pitches)
Optional Multi-purpose Fix Mount
UL60950-1/C-UL/TUV-GS/EN60950-1/FCC-B/DOC-B/EN55022-B
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE
VESA DPM
VESA DDC2B, DDC/CI
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2 (To prevent from falling), Clamper x 2 (For securing cables),
Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder x 2,
Main switch cover, Stand x 2, Thumbscrew for stand x 4
English-37
Digital Input
25.0 -165.0 MHz
TMDS
HDMI