Maintenance
Brakes
FRONT HYDRAULIC DISK BRAKE INSPECTION
1. Inspect front disk brake caliper (1) for leakage. If brake fluid leaks, the
safety of riding could be affected.
2. Inspect the brake hose (2) for cracks, and the joint for leakage.
3. Check the brake fluid level through the sight hole on front of brake fluid
reservoir (3)
4. To add brake fluid, unscrew the 2 screws (4) on top of the brake fluid
container located under top plastic cowling. Add DOT3 or DOT4 brake fluid.
Do not mix brake fluid types.
ADJUSTMENT OF REAR BRAKE
2
1
1.
To make rear break adjustment,
1
turn rear adjusting nut (1)
clockwise to increase and
counterclockwise to reduce
tension on the brake cable.
2. Brake shoes should be replaced
by a qualified service technician
once worn.
18
4
3