Advertisement
Hardware Installation
Step 1:
Power off your PC. Open the computer case. Remove the coverplate
of an unused expansion slot.
Step 2:
Align the bus on the card with the PCI slot.
Step 3:
Gently press
TV Tuner card
down into the slot until you feel the edge
of the bus reaches the bottom of the PCI slot. Note that the capture
card can be inserted into PCI slot in one direction only.
Step 4:
Secure the bracket of the card to your computer case with the screws.
Then fit the computer case cover back in place.
Step 5:
Connect the input sources and output devices to your capture card
following the instructions given in
Connect Input and Output
Devices
section on the next page. Now you are ready to connect the
video sources to your capture card.
Advertisement
