Download Print this page

Fujitsu LR 6632 Hardware Manual

Card.
Hide thumbs
   

Advertisement

LR 6632
TV Tuner Card
HARDWARE GUIDE
Contents
Hardware Specifications
Hardware Installation
Connecting Input & Output Devices
Driver Installation

Advertisement

   Related Manuals for Fujitsu LR 6632

   Summary of Contents for Fujitsu LR 6632

  • Page 1

    LR 6632 TV Tuner Card HARDWARE GUIDE Contents Hardware Specifications Hardware Installation Connecting Input & Output Devices Driver Installation...

  • Page 2

    Hardware Specifications Hardware Interface 32-bit PCI 2.2 bus mastering Plug-n-Play compliant Compatibility Graphics drivers must include DirectX 8.1 or later software Video Standards PAL/SECAM TV Tuner PAL/SECAM Full 181 channels supported FM Tuner (Optional) Stereo FM 87.5MHz - 108MHz Connectors 1 FM RF connector 1 TV RF connector 2 Audio jacks...

  • Page 3: Hardware Installation

    Hardware Installation Step 1: Power off your PC. Open the computer case. Remove the coverplate of an unused expansion slot. Step 2: Align the bus on the card with the PCI slot. Step 3: Gently press TV Tuner card down into the slot until you feel the edge of the bus reaches the bottom of the PCI slot.

  • Page 4

    Connect Input & Output Devices Connectors Audio in (R) TV in S-Video in Audio in (L) Composite Video in FM Antenna From Cable TV or Antenna Audio in S-Video in Composite Video in DVD/VCD Player SONY PlayStation SELECT START ANALOG CCD camera CCD camera Camcorder...

  • Page 5: Driver Installation

    Driver Installation Installing the First Driver Step 1: Turn on your PC and start up the Windows. Step 2 Shortly after entering the Windows , you will see the Found New dialog box as Hardware Wizard shown in the first figure to the right. Tick the option for ' Install from a list '.

  • Page 6

    Step 6: When the installation of the first driver is completed. A dialog box appears as shown in the figure to the right. Click Finish. Installing the Second Driver Step 7 After finishing installing the first driver, Found New Hardware Wizard dialog box restarts.

  • Page 7

    Step 11: When the installation is finished. The wizard will display a dialog box to tell you so. Click Finish Installing the Third Driver Step 12 Again, the Found New Hardware dialog box restarts. Tick the Wizard option for ' Install from a list or '.

  • Page 8

    Step 16: When the installation is done. The wizard will display a dialog box to tell you so. Click Finish Installing the Fourth Driver Step 17 Again, the Found New Hardware dialog box restarts. Tick the Wizard option for ' Install from a list or '.

Comments to this Manuals

Symbols: 0
Latest comments: