Gigabyte GA-Z68XP-UD3-iSSD User Manual page 96

Step 3: On the Create VD menu (Figure 6), use the up or down arrow key to move the selection bar to select
an item and press <Enter> to display options. Set the required items in sequence and press the down arrow
key to proceed to the next item.
Sequence:
1. RAID Level: Select a RAID level. Options include RAID 0 (Stripe) and RAID 1 (Mirror).
2. Stripe Size: Select the stripe block size. Options include 32 KB, 64 KB, and 128 KB.
3. Quick Init: Select whether to quickly erase old data on the hard drives when creating the array.
4. Cache Mode: Select write-back or write-through cache.
5. VD Name: Enter an array name with 1~10 letters (letters cannot be special characters).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection] [ Adapter]
Select free disks to create
Port Disk Name
Create VD
* S0 SATA: WDC WD800JD-22LSA0
RAID Level
* S1 SATA: WDC WD800JD-22LSA0
Max Size (MB):
Stripe Size
Quick Init
Cache Mode
VD Name
Disks ID
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
6. NEXT: After completing the settings above, move to NEXT and press <Enter> to begin creating the array.
When prompted to confirm, press <Y> to confirm or <N> to cancel (Figure 7).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection] [ Adapter]
Select free disks to create
Port Disk Name
Create VD
* S0 SATA: WDC WD800JD-22LSA0
RAID Level
* S1 SATA: WDC WD800JD-22LSA0
Max Size (MB):
NEXT
Stripe Size
Quick Init
Cache Mode
VD Name
Disk ID
NEXT
Create the VD?[Y]
Appendix
[ Devices]
: RAID0
152478
: 64KB
: NO
: WriteBack
:
: 01
Figure 6
[ Devices]
: RAID0
152478
: 64KB
: NO
: WriteBack
: GBT
: 01
Figure 7
- 96 -
[ RAID ]
RAID Config
Size Max Speed Status
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
[ RAID ]
RAID Config
Size Max Speed Status
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE