52
Recording and Playing Back
1.
2.
3.
4.
5.
6.
7.
8.
7.4 Editing a recording
7.4.1 To erase a block from a recording
You can cut out a block such as commercial film from a record-
ing file by performing the following steps:
1.
2.
3.
4.
5.
6.
7.
Start playback of a recording file you want.
Press
button to display a progress bar.
Find one end position of a block you want to specify
with
button or
button.
Press
button at the position, then the point starts to
blink.
Find the other end postion.
Press
button at the position again, then the block
turns to green and starts to be played back repeatedly.
Press
button to hide the progress bar.
To withdraw the block, press
that the progress bar is displayed.
Start playback of a recording file you want.
Press
button to display a progress bar.
Find one end position of a block you want to specify
with
button or
button.
Press
button at the position, then the pointer starts to
blink.
Find the other end postion.
Press
button at the position again, then a confirmation
box appears.
Select the Cut command, then the block is erased.
button on condition