Kia Sorento 2014 Owner's Manual page 152

✽ ✽ NOTICE
For non rolling code garage door
openers, follow steps 2 - 3.
For rolling code garage door open-
ers, follow steps 2 - 6.
For Canadian Programming, please
follow the Canadian Programming
section.
For help with determining whether
your garage door opener is non-
rolling code or rolling code, please
refer to the garage door openers
owner's manual or
HomeLink customer service at 1-
800-355-3515.
Flashing
Transmitter
contact
2. Press and hold the button on the
HomeLink system you wish to
train and the button on the trans-
mitter while the transmitter is
approximately 2-8 cm (1 to 3 inch-
es) away from the mirror. Do not
release the buttons until step 3
has been completed.
3. The HomeLink indicator light will
flash, first slowly and then rapidly.
When the indicator light flashes
rapidly, both buttons may be
released. (The rapid flashing light
indicates successful programming
of the new frequency signal.)
Features of your vehicle
✽ ✽ NOTICE
Some gate and garage door openers
may require you to replace step #3
with the "cycling" procedure noted
in the "Canadian Programming"
section of this document.
OHD046307N
4 61