Display Controller And Modes - Toshiba TECRA S1 Series User Manual

Display Controller and
Modes
Display controller
The display controller interprets software commands into hardware commands that
turn particular pels on or off.
The controller is an advanced Video Graphics Array (VGA) that provides Super
VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and
external monitors.
Three models are available:
14" XGA, 1024 horizontal x 768 vertical pixels
15" XGA, 1024 horizontal x 768 vertical pixels
15"U XGA, 1600 horizontal x 1200 vertical pixels
A high-resolution external monitor connected to the computer can display up to
2048 horizontal and 1536 vertical pixels at up to 16M colors.
The display controller also controls the video mode, which uses industry standard
rules to govern the screen resolution and the maximum number of colors that can be
displayed on screen.
Software written for a given video mode will run on any computer that supports the
mode.
The computer's display controller supports all VGA , SVGA and UXGA modes, the
most widely used industry standards.
Appendix B
B-1