Sim Card Slot - Toshiba AT270 User Manual

1.
2.
3.
1. Memory media slot
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1.
2.
3.
4.
Do not remove the memory media while the tablet is in Sleep mode. The
tablet could become unstable or data in the memory media could be lost.

SIM card slot

Some models are equipped with a SIM card slot that allows you to
assemble a SIM card from your wireless service provider to use your
provider's mobile networks for transmitting data.
This section only applies to models with 3G modules.
User's Manual
Turn the memory media so that the contacts (metal areas) are facing
down.
Insert the memory media into the memory media slot on the tablet.
Push the memory media gently until you hear a click.
Figure 7-1 Inserting a memory media
Make sure memory media is oriented properly before you insert it. If
you insert the media in wrong direction, you may not be able to
remove it.
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.
Do not turn the tablet off or switch to Sleep Mode while files are being
copied - doing so may cause data loss
Make sure all file operations are finished.
Tap All Apps -> Settings -> Storage -> Unmount SD card.
Push the memory media until you hear a click to partially release it.
Grasp it and pull it out of the slot.
1
2
2. Memory media
7-3