Table of Contents
Advertisement
9. After the tone arm
has been mounted
and adjusted, it is
necessary to verify
the correct
horizontal position
of the cartridge with
respect to the
platter. Place a
mirror on the platter
and lower the
pickup stylus onto
its surface. When
viewed from the
front, the cartridge
must be position
symmetrically
about its vertical
axis. By comparing
the cartridge and its
mirror image, the
correct position
may be determined
(Figure 23); if
necessary, the
cartridge can be
adjusted by holding
the wand and
rotating the head
part only, until
symmetry is
achieved.
< Previous
Next >
Top
Hide quick links:
Advertisement
Table of Contents
