ATI Technologies All-in-Wonder Radeon Installation And Setup User's Manual page 37

5
Using a cable with either S-Video or RCA connectors,
attach one end of the cable to the output cable adapter and
the other to your television.
6
Turn on your computer and your television.
If there is no display, you may need to enable the television
output capability; see
page 38.
For detailed cabling diagrams and audio connections, see
Input and Output Adapters
If you have a television connected to your VCR, you can use
the television as your computer's display. For information
about connecting a television to your VCR, see the
documentation that came with your VCR.
If you have a television connected to a VCR that is
conected to the ALL-IN-WONDER's A/V OUT, and
Note
you use the television as your computer's display,
copy-protected DVD movies may appear alternately
bright and dim.
Some PC monitors in Europe cannot be used
simultaneously with television display. When you enable
television display in Europe, the refresh rate for the monitor
and television is set to 50Hz. Some monitors may not
support this refresh rate and could be damaged.
• Please check the documentation supplied with your
monitor to see if your monitor supports a refresh rate of
50Hz.
If your monitor does not support 50 Hz (or if you are
not sure), then turn off your monitor before turning
on your computer when using your television as a
display.
For information on disabling television display, see
enable and disable the television display on page
Some televisions in Europe may use an SCART
connection. If you use SCART, please read
connectors for European televisions on page 38
attempting to connect your PC to your television.
Using Your ALL-IN-WONDER
Using and adjusting TV Out
IMPORTANT INFORMATION
for European Customers
on page 26.
Using SCART
37
on
To
38.
before