Changing The Brake Fl Uid; Checking And Lubricating The Cables - Yamaha Zuma YW125A Owner's Manual

check the cause.
PERIODIC MAINTENANCE AND ADJUSTMENT
Changing the brake fl uid
Have a Yamaha dealer change the
brake fl uid at the intervals specifi ed in
the TIP after the periodic maintenance
and lubrication chart. In addition, have
the oil seals of the brake master cyl-
inder and caliper as well as the brake
hose replaced at the intervals listed
below or whenever they are damaged
or leaking.
●
Oil seals: Replace every two
years.
● Brake hose: Replace every four
years.
6-22
EAU22721
Checking and lubricating the
cables
The operation of all control cables
and the condition of the cables should
be checked before each ride, and
the cables and cable ends should be
lubricated if necessary. If a cable is
damaged or does not move smoothly,
have a Yamaha dealer check or re-
place it. WARNING! Damage to the
outer housing of cables may result
in internal rusting and cause in-
terference with cable movement.
Replace damaged cables as soon
a s p o s s i b l e t o p r e v e n t u n s a f e
conditions.
[EWA10711]
Recommended lubricant:
Yamaha Chain and Cable Lube or
engine oil
EAU1722A
EAU23093
1
2
3
4
5
6
7
8
9