Advertisement
The 4260's global supply
Supply for
the sphere 420
Passive Bi-Amplification
(medium / high)
connections
Attention: Also remove conductor links between
the low section and the medium-high.
+
Bi-wiring
Amplifier 1
-
Bi-wiring can improve the performance of your speakers. A single amplifier is used, but
separate cables are used for low and high for each speaker. High quality cables are
needed for best performance. Left tie-point blocks for highs and right tie-point blocks for
lows. Also remove conductor links between the low section and the medium-high.
Bi-Wiring
Supply for
the sphere 420
connections
(medium / high)
Attention: Also remove conductor links between
the low section and the medium-high.
+
Amplifier 1
-
Supply for
the woofer C60
(low)
+
Amplifier 2
-
Supply for
the woofer C60
(low)
+
Amplifier 1
-
29
Classic Amplification
connections
+
Passive bi-amplification
You can use two different amplifiers to supply the 4260. The medium/high register
amplifier will be chosen with output between 40 and 100W. The amplifier supplying the
Amplifier
low register will have power between 100 and 250W. You should remove the conductor
-
links between the low section and medium-high. This separation preserves the internal
speaker filtering. You should therefore not use an active filter before the amplifiers.
The 4260's global supply
Supply for
the sphere 420
Passive Bi-Amplification
(medium / high)
connections
Attention: Also remove conductor links between
the low section and the medium-high.
+
Amplifier 1
-
Bi-Wiring
Supply for
the sphere 420
connections
(medium / high)
Attention: Also remove conductor links between
the low section and the medium-high.
Supply for
the woofer C60
(low)
+
Amplifier 2
-
Advertisement
