Network Setup - Lindy 32697 User Manual

English Manual
ii. Network Setup
There are many kinds of operating configurations as below.
< Auto-Configuration Network Setup>
The default setting of the WPS box is DHCP client. When the WPS box is connected to a LAN
that already has a DHCP server present, the WPS box takes an IP address assigned to it by the
server. When the WPS box is connected to a LAN that does not have a DHCP server, the WPS
box becomes the DHCP server in the network.
< IP Setup>
You can select "obtain IP address automatically" or "Use the following IP address"
IP Address: The default value is 192.168.100.10.
Subnet Mask: The default value is 255.255.255.0
Default Gateway: The default value is 192.168.100.10
DNS Server: The default value is 192.168.100.10
<DHCP Server Setup>
You can select "auto(Enable/Disable DHCP Server" or "Disable")
Start IP: The start IP address of DHCP Server.
End IP: The end IP address of DHCP Server
Subnet Mask: The default value is 255.255.255.0
English 25